RPM Truck

Designed for efficiency and ease of use, our RPM truck saves time and money every time it hits the road.


specifications are subject to change.


  • Isuzu FE204; NPR HD Gas Reg
  • 14.500 pound GVWR
  • 132.5 inch wheel base
  • 170 amp alternator
  • 38.6 gallon fuel tank
  • GMP-T-V8 Gas engine, 6 liter, 8 cylinder, 350 HP and 425  lb/ft of torque
  • Model 6L90-E Hydra-Matic transmission
  • 225/70R 19.5G tires with steel wheels, and back-up alarm


  • Smooth aluminum with grip material strips
  • 96"x151" deck
  • 8" risers to provide room for the suspension
  • (2) operator baskets mounted in front of the rear tires
  • Basket is no greater than 6" from the pavement during operation, providing EZ application
  • Baskets adjustable depending on need
  • Swing gates hinged out away from the deck
  • Powder coat color decided by customer
  • (2) 18"x18"x24" toolbox mounted on rear

Positive Displacement Pump

  • Adjustable output up to 13 cubic inches per stroke
  • Shot size adjustment with mechanical stroke limiter for simplicity and ease of service

Bituminous Supply System

  • Capable of heating up to 500lbs of bituminous material, air jacketed melter
  • Welded steel melting tank
  • Melting tank has a hinged 12"x8.5" loading hatch with a total open area of 102 square inches
  • Lid is designed to close away from operator with locking pin
  • Melting kettle requires an agitator with the bypass always "ON" which prevents scorching of the material
  • The tank is LP fired using and impinged jet-type burner with an output of 150,000 BTU/hr


  • Melter kettle comes equipped with a continuous, full sweep hydraulic agitation system to prevent filler from falling out of suspension, and to speed the melting rate of the material

Heated Output Hose

  • 10 foot hose with an applicator pistol
  • A type "J" thermocouple-type temperature sensor is attached to the stainless-steel over-braid
  • (1) Duck bill applicator

Air Compressor/Auxiliary Engine

  • Kawasaki air-cooled, four cycle, single cylinder engine
  • 18 HP at 3,600 RPM
  • Propane operation with 100lb propane tank
  • High efficiency air-cooling fan
  • 14-20 CFM air compressor

Hydraulic System

  • .66 displacement rotary piston hydraulic pump; belt driven
  • 8-12 gallon oil reservoir
  • By-pass ball valve for easy auxiliary engine
  • Oil cooler 12 VDC assembly
  • Bituminous pump

Electrical System

  • The melter applicator has digital electronic temperature controllers that will automatically regulate the material temperature and the hose temperature
  • The material thermostat controls burner ignition automatically up to 450 deg. F
  • Pumps are controlled by a 12-volt DC, 4-way electrically operated hydraulic valve

Arrow Board

  • National Signal 25 LED lamp 3 foot by 6 foot actuated arrow board with controller in chassis cab

Intercom System

  • David Clark Model U3800 three station with one H3492 single earpiece headset & one Model H3432 dual earpiece headset
  • Three headset storage hooks

Safety Light System

  • Two Whelen Model L41AP amber LED 360-degree strobes on front of deck
  • Two Whelen Model 70A02FAR amber directional light heads on rear deck
  • One Whelen Model LINV2A mini amber LED 180-degree strobes on baskets, one per basket

LED Work Light System

  • Six Hella 2,000 lumen LED work lights

We are currently experiencing issues with our phone and voicemail systems!

We are not receiving all voicemails and not all calls are going through, so if you have not been contacted back within 12 hours, please use the following contact information or submit an inquiry on our website.


(712) 707-9772