2006 model Isuzu (33,000 lb. GVWR); Isuzu diesel 250HP; Transmission: Allison 3000 RDS 6-speed; Front Axle: 12,000 LB; Rear Axle: 21,000 LB; RATIO 5.57:1; Brakes: Air; Wheel Base: 170"; Tires: 22.5” Wheels: DISC; Air Conditioning: YES; Low Speed Cruise down to 5 mph

96” x 180” equipment platform with hand rails and hinged fold-up style ladders

500 gallon capacity 10 ga. ss paint tanks (250 Y, 250 W) to include:

-bolted removable top and graphite coating lining the inside of the paint tank for easy clean out

-12” square hinged inspection lid and pressure equalization vent

-dipstick for paint level monitoring

-sloped bottoms to valved outlets

-hydraulic powered agitators, 1 per tank

2,500 lb. capacity bead tank with muffled bead load system and sight level gauges

Ingersoll Rand 185 cfm aux. engine/compressor package

2.75 CIR pressure compensated hydraulic pump with 30 gallon reservoir

Centerline and edgeline carriages mounted behind rear axle

Open operator's station with air ride seats

Mechanical guidance system to include pneumatic tire and lift

Skipline, Inc. SM-5 controller, 1 per side with footage counters

Gallon counters on hp pumps with readout through Skipline system

Four (4) Titan/Speeflo 8.6 gpm each hp paint pumps (hydraulic powered)

Two ARO 2" diaphragm pumps curbside for paint loading

Graco 238-377 paint and Binks model 30 bead guns (3 lines left, 2 lines right-dual color paint guns) with electric actuators on each paint gun

David Clark intercom with 2 dual and 1 single muff headset

36" x 72" LED arrowboard with electric tilt controlled from chassis cab

3 stage paint filtration, canister at outlet of load pumps, y strainer at inlet of hp pumps, and hp filter at outlet of hp pumps

7' finned cooler; 12 gallon air receiver; general purpose air filter and lubricator for the system; and coalescing filter for the bead tank

LED safety lights to include:
-Two 360 degree strobes in front corners of platform

-Two 180 degree strobes in rear corners of platform

-Two clusters of 3 direction LED light module flashers for gun carriage visibility

Night lighting system including 8 halogen work lights

Optional equipment:  Steel canopy, paint heating capabilities, and laser, video, or optical guidance systems just to name a few.