Equipment Overview

The single operator/one man operation striper available from EZ-Liner’s arsenal of striping equipment is the Self-Propelled Ride-On pavement striper. This unit has an airless paint system with a manual or a skipline controller and forward carriage design. Hand spray capability can be added for legend marking. Paint choices are a single 50 gallon tank or two 25 gallon tanks.

  • Recommended for airports, contractors and municipalities
  • Interchangeable paint tanks and quick connect fittings for mulitple colors
  • Chassis suspension provides for stable painting and longer driveline life
  • Throttle and ground speed control for a constant speed and consistent line
  • EZ-Liner warrants all equipment manufactured by EZ-Liner for 12 months from the date of purchase. Some conditions apply. Contact EZ-Liner for more warranty information.

Base Unit

  • Single operator design
  • Specially designed diamond plate deck with formed edges
  • Reversible forward carriage design with pneumatic lift
  • Self-contained power pack with 23 hp Honda auxiliary engine and 7 gallon C.A.R.B. compliant fuel tank
  • 13.2 cfm air compressor
  • 2 gallon air reservoir and air filter
  • Air dryer assembly
  • 250# pressurized glass bead tank
  • 17 gpm hydraulic pump with 12 gallon reservoir
  • Capacities ranging from 30 to 60 gallons of paint
  • Airless paint delivery system using a 3.1 gpm paint pump
  • Total stainless steel wetted plumbing package
  • Low pressure and high pressure paint filtration system
  • Varied gun configurations
  • Conveniently located manual gun controller
  • Line guide

Options & Accessories

  • Additional paint pump option (for 2 colors)
  • Additional paint and bead lines
  • Gun actuators
  • Skip-Line, Inc. controller (specify # of lines)
  • Strobe lighting packages
  • Laser guidance systems
  • Air system lubricator for smoother solenoid operation and longer life
  • Hand gun with 25’ high pressure hose (paint only or paint and bead)
  • Pole gun with 2 wheel carriage and 25’ high pressure hose (paint only or paint and bead)
  • Recommended spare parts kit